Showing 1–24 of 52 results

Show sidebar
Close

24 Bay Charging Case for RF Receiver/Transmitter – RF-DC-24

This charger unit/case is for use with the Portable RF Transmitter [RF-TX1-865/915] and Portable RF Receiver [RF-RX1-865/915] and can hold up to 24 receivers/transmitters in a standing position. The case is provided with a power supply and charging is a simple drop-in connection. The built-in digital panel enables fast and easy programming of multiple devices, including data-copy and channel-sync for compatible transmitters and receivers. This provides fast setup from a master device.

Close

5 Bay Charging Station – IR-RX2-DC5

Our 5 bay charging station is available for the IL-RX30 rechargeable hearing loop listener. This unit can hold up to 5 loop listeners in a standing position. Up to 4 listeners can be daisy-chained together to charge up to 20 listeners using a single power supply. Note: There is also the option of the IR-RX2-DC1 single bay hearing loop listener charger.
Close

5 Bay Infrared Receiver Charger – IR-RX2-DC5 / IR-RXU-DC5

Our 5 Bay Infrared Receiver Chargers are available for both the Portable Infrared Receiver and Portable Infrared Earphone Receiver.

This unit can hold up to 5 receivers in a standing position. Two chargers can be daisy-chained together to charge 10 receivers using a single power supply.

Close

Ceiling Mounts for Main & Service Displays – QC-TUBEHANG

The Ceiling Mounts allow mounting of the system’s Main Display and Service Displays to the ceiling, providing better visibility to your customers.
Close

Central Control Unit DNC

Heart of the Diplomat conference & interpretation system, acting as the controller for both the interpretation system and the conference system. When integrated, both component parts become part of the same digital network (DNS) and when separate, they can act as standalone systems (either conference or interpretation). DNS is capable of supporting up to 64 channels which can be assigned to different languages when any number of DAIUs is connected. As a seamless digital network, DNS is capable of maintaining the Diplomat’s ultra high-quality audio (48kHz, 24bit) across all component parts – conference/interpretation/listening posts. The DNC has 6 x RJ45 I/O connectors representing the 6 x zones or 3 x redundant loop pairs which are individually bootable by push-buttons, into which the DNS’ CATx cabling infrastructure would start/finish. For power beyond 120 units connected at the same time, the Intelligent Power Injector (IPI) is used, a locally-fitted (on the zone) power injector. Full-feature front panel control available including backlit LCD display, rotary knobs and push buttons for the various functions, as well as local monitoring. Like all Auditel CCUs, the DNC uses RS-232 comms to link with an Auditel Computer, enabling ACCS to be integrated with the connected conference system plus more.  
Close

Control Hub – QC-HUB

The Control Hub is the Q-Control’s system interface module, controlling all components of the system. It is connected to all modules either directly or through a Junction Box.
Close

Ear-Worn Microphone for use with Transmitter – RF-TX1-EM

This ear-worn microphone is compatible with the Portable Radio Frequency Transmitter [RF-TX1-865/915] and has a 1.2 metre cable and mini-XLR connector. It enables handsfree communication with clear sound using a high quality Condenser microphone capsule.

Close

Headphones – IR-HP1

Our black stereo headphones use a 2 metre lead and uses a standard 3.5mm audio jack.
Close

IL-K200

Under the Counter Loop System
This system offers clear communication with hearing instrument wearers, especially were background noise is a problem or clear speech is restricted. It has a flexible, discreet hearing loop aerial that can be bent to shape, allowing it to be tailored to many different counters.
Above the Counter Loop System (1)
Close

IL-K300

Above the Counter Loop System
Our Above the Counter Loop System provides clear communication with hearing instrument wearers, especially where background noise is a problem or clear speech is restricted. The hearing loop aerial is located within the signage, which is fixed to a counter, desk or glass surface to enable customers to easily identify the loop and get maximum benefit from it. The unit can be fitted into many positions due to its low profile structure.
Portable Loop
Close

IL-PL20-2

Portable Loop Driver
The Portable Loop is a versatile solution, providing movable desktop assistance for your customers where a fixed loop cannot be installed. It is used for conversations between two people.
Close

IL-RX30 Rechargeable Loop Listener

The Contacta RX30 Rechargeable Hearing Loop Listener is a compact listening device for use with hearing loop systems. It enables people to listen to a hearing loop system as if they were wearing a hearing device switched to the T-Coil Program.
Close

Inductive Loop – IR-NL1

Our Inductive Neck Loop is a compact listening device which connects to our Portable Infrared Receiver and enables users to listen using a hearinginstrument switched to the “T” position (i.e.using the Telecoil in a hearing aid).

It connects to receivers using a 3.5mm audio jack.

Close

Infrared Transmitter with Modulator – IR-TX2

The Medium Area Infrared Transmitter with Modulator combines an infrared modulator and transmitter, providing a wide angle of emission with a sleek and compact design (available in both black and white). With a coverage area of 180m2, it is ideal for use in medium-sized environments.
Close

Infrared Transmitter with Modulator – IR-TX4

Our two-channel Large Area Infrared Transmitter with Modulator combines an infrared modulator and transmitter, generating a wide exit angle for the infrared signal while providing a sleek and compact design that eliminates the need for rack space. It is ideal for use in large environments.

Transmissions are at a bandwidth of 2.3 and 2.8mHz. In 1-channel mode, the transmitter supplies areas of up to 900m². Additional transmitters allow the receiving range to be increased.

Close

Junction Box – QC-JB-00

The Junction Box provides additional connections in a Q-Control system when more than two service positions are used. One Junction Box is required for each extra set of two service positions.
Close

Lapel Microphone for use with Transmitter – RF-TX1-LM

This lapel microphone is compatible with the Portable Radio Frequency Transmitter [RF-TX1-865/915]. It includes a tie clip and 1 metre cable with a mini-XLR connector. It enables handsfree communication with clear sound using a high quality Condenser microphone capsule.

Close

Main Display – QC-MD-G

The Main Display of the Q-Control is located at the head of a queue. It informs customers when a service position becomes available. The device’s visual information is displayed in red by default, with text scrolling across the top of the display. It also provides audio guidance selectable in a male or female voice.
Close

Microphone Unit DCMU / DDMU – L

Large-body design microphone unit for the Diplomat conference system, available with the following features: • Request button (included as standard) • Loudspeaker (included as standard, single or dual) • Electronic Voting (5-button or 3-button) • Card-Reader • Channel Selector (single or dual) • USB charging • Biometric Fingerprint Recognition • Priority button for Chair unit (DCMU-S) • LCD Display Any combination of the above options is available, as with Auditel, custom is standard. Bespoke finishing/printing is available on request. As a component part of the Diplomat system, all microphone units benefit from our ergonomic silent ‘soft-touch’ buttons and ultra high-quality audio. The base unit is spec’d separately from the gooseneck (DM-1) and the intelligent design of the DDMU/DCMU-x units means that they are suitable for both portable and fixed installations. Custom design requirements mean that sample images may vary from production units as well their respective approximate dimensions provided.
Close

Mouse Controller – QC-MOUSE-G

The Mouse Controller is the Q-Controls’ interface device used by staff at service positions. One Mouse Controller is installed at every service position connected to the Q-Control system. Staff using the Mouse Controller can select either a male or female voice to alert customers that their service position is available.
Close

Portable Infrared Receiver – IR-RX2

Our Portable Infrared Receiver is a four channel receiver, compatible with our infrared transmitters using frequencies 2.3MHz and 2.8MHz. It features automatic gain control and high sensitivity for incoming infrared signals.

The receiver uses rechargeable batteries, and is a versatile and sturdy unit which requires either headphones or an assistive hearing neck loop. Volume is amplified, adjustable up to 120dB to assist users with hearing loss.

Close

Portable Infrared Underchin Receiver – IR-RXU

Our Portable Infrared Underchin Receiver is a twochannel under-the-chin receiver, compatible with our transmitters using frequencies 2.3MHz and 2.8MHz.

The receiver is easy-to-use, comfortable and can switch between mono and stereo. Its earpieces swivel, meaning they keep their position in the ear even when a user turns his/her head. It utilises rechargeable batteries.

Volume is amplified, adjustable up to 120dB to assist users with hearing loss. Spare rubber earbuds are available if required.
Close

Portable Radio Frequency Handheld Transmitter – RF-TXHH-865 / RF-TXHH-915

This handheld microphone has an integrated multi-frequency transmitter and UHF technology. It is for use with Portable Radio Frequency Receivers [RF-RX1-865/915], with two versions available that respectively work on 865MHz (UK/EU) or 915MHz (USA/AU) frequencies. This microphone transmits sound wirelessly and directly to groups of receivers programmed on the same channel, making it ideal for use in lectures, events, and educational venues. The unit is supplied with 2x AA Alkaline batteries. However, rechargeable batteries can be used to power the unit and charged through the micro-USB charge port.

Close

Portable Radio Frequency Receiver 865MHz / 915MHz – RF-RX1-865/915

A lightweight Portable Radio Frequency Receiver which provides high-quality sound received from compatible transmitters, with two versions that respectively work on 865MHz (UK/EU) or 915MHz (USA/AU) frequencies. There is no limit to the number of receivers which can be used per group. The receiver utilises digital audio transmission technology. A micro-USB power supply provides fast and simple charging and the unit can also be charged using the drop-in RF-DC6/RF-DC24 charging trays.